Better Rving - if you love Rving - this is home
Better Rving Home
RV Living
RV Reviews
RV Toolbox
RV Gear and Swag
RV Tips
Ask Andy Your RV Questions
Better Rving RV Fourms
BY STACI BACKAUSKAS AUGUST 2009
Don't Let Your TV Signal Flatline
Converting From Analog to Digital
The conversion from analog to digital, has caused confusion and frustration for many. Fortunately, regardless of the type of TV you currently have in your RV, you do not have to purchase a newer one in order to get reception.
If you have a thinner model that was purchased in 2007 or later, or receive a signal from satellite or cable, your viewing experience was probably not interrupted by the switch. If, however, your older model TV has a large “box” on the back of it then it is analog, which means it will need a converter box in order to receive the now digital signal.
Ken Taylor, an RV tech support specialist at Lazydays, advises doing a little research before buying a converter box. “First, determine the amount of space you have for it and identify the type of power available in that area,” he suggests. The box is controlled by an infrared remote so the front of it must be in plain view.
“If the nearest power source is a cigarette lighter, a converter box that runs off 12-volts will be adequate and easy to install,” Taylor explains. “If there isn’t a 12-volt power source nearby, you’ll have to buy one that uses 110 and run it to the nearest outlet.”
Conversion boxes are available at many retail stores like Wal-mart, Target, and Best Buy as well as online. He also recommends comparison shopping for both price and features. “Some of them include a channel guide and other bells and whistles, so it’s really of matter of deciding which best suits your needs.”
Installing the box is easy if your RV has a cabinet with a switch box. Otherwise it may be a bit more complicated and require a call to an RV dealer or manufacturer for clarification. Once the box is hooked up to your analog TV, it will convert the digital signal back to analog so your TV receives the picture and sound. For higher quality images, Taylor suggests hooking up the box with RCA & S-Video cables instead of the standard cable connectors.
For more information on the conversion process, including side-by-side comparisons of various boxes, visit
ezdigitaltv.com.
Del.icio.us
Digg
Facebook
Reliit
Stumbleupon
Google
Mixx
Propeller
LinkedIn
Twitter
Share your thoughts on this story
First Name (Only)
Location
Email (Optional)
Comment
You have
250
characters left to comment.
Comments
John (KY)
Sep. 27, 2009 - 10:49 AM
I am not able to generate enough volumn through set. Does anyone know if this is related to converter boxes? Thanx johenry44@gmail.com
John (KY)
Sep. 27, 2009 - 10:48 AM
I am not able to generate enough volumn through set. Does anyone know if this is related to converter boxes? Thanx johenry44@gmail.com
bill (tn.)
Sep. 22, 2009 - 10:53 AM
from experience& a t/v tech.most of this is not right.the dig. sig.can t come thru the ant.booster or the circuit board on the antenna.[gull wing]i was unable to recieve any sgnal,until the booster was circumvented and the cir.bd removed fr.ant.
Weekly Tip #4
The Good, the Splat and the Ugly
Summer Travel Checklist
Weekly Tip #1
Weekly Tip #2
Weekly Tip #3
RV Driver Confidence Course
iRV2: RV Applications for the Blackberry
The Art of Packing
RV Driver Confidence Course – Part 6: Your Rear View Monitor
{1}
##LOC[OK]##
{1}
##LOC[OK]##
##LOC[Cancel]##
{1}
##LOC[OK]##
##LOC[Cancel]##
Weekly Tip #4
The Good, the Splat and the Ugly
Summer Travel Checklist
Weekly Tip #1
Weekly Tip #2
Thank you for participating in our survey!
First Name
Last Name
Email Address